Product description：
Electrolytic tinplate is low-carbon mild steel sheet or coil coated on both surfaces with tin that is applied in continuous electrolytic operation. The surface of electrolytic tinplate is normally subjected to a passivation treatment and to oiling.
Product description：
Electrolytic tinplate integrates the advantages of steel and tin. It brings excellent properties of formability and strength, paint-ability and printability, solderability and weldability, corrosion resistance and beautiful appearance. Electrolytic tinplate has been widely used in the electronic industry as a protective and solderable coating for electronic components, wires, printed circuit boards, and integrated circuit blocks due to its excellent corrosion resistance and solderability. Tinplate also has nontoxic and good ductility properties, making it widely used in food, medicine, commodity, instrument and general packaging. Under normal conditions of transport and storage, electrolytic tinplate shall be suitable for surface treatments such as established lacquering and printing operations.
Product Parameters
|
Product Name |
Electrolytic Tinplate (ETP) |
|
Thickness |
0.18Mm-0.50mm |
|
Width |
260Mm-980mm |
|
Length |
Support customization |
|
Tin Coating |
General: 2.8g or 5.6g, can be produced according to your needs |
|
Substrate Type |
MR / SPCC / L / D |
|
Reference Standard |
GB/T 2520, JIS G3303, JIS G3315, DIN EN 10202, DIN EN 10203 |
Surface State of Tinplate
|
Surface State |
Features |
|
Light Surface |
Electroplated tin smooth raw material strip after melting treatment to obtain the glaze,Smooth surface with very fine grindstone pattern |
|
Stonetextured Surface |
Electroplating tin raw material with the glaze obtained after melting treatment,Grindstone pattern with certain direction |
|
Silvercolor Surface |
Electroplating tin raw material with the glazed surface obtained after melting treatment, the surface is rough and dull |
|
Mattless Surface |
The surface of the substrate is rough and dull, and the tin plating layer is not soft melting |
Substrate Type
|
Substrate Type |
Introduction |
|
MR |
The most general steel, steelmaking impurity residue less, excellent mechanical properties and corrosion resistance |
|
L |
Used for the production of acidic contents (oranges, yellow peaches, pineapples, etc.), and the inner surface of the food cans for iron high corrosion resistance tinplate substrate steel, such tinplate is often calledKPlate |
|
D |
Used to produce two pieces of high-processing tin plate substrate steel, such tin plate is often called.DIMaterial |
|
SPCC |
Chinese characteristics, using ordinary hot rollingSPHCProduces, usually used for miscellaneous tank purposes. |
Coating Weight
|
Classification |
Representation of Tin Coating Weight |
Tin Plating Nominal Weight (g/m2) |
Minimum Average Tin Plating Weight (g/m2) |
|
Equal Tin Plating (E) |
1.1/1.1 |
1.1/1.1 |
1.8 |
|
2.2/2.2 |
2.2/2.2 |
4.0 |
|
|
2.8/2.8 |
2.8/2.8 |
5.0 |
|
|
5.6/5.6 |
5.6/5.6 |
10.5 |
|
|
Differentiated Tin Plating (D/A) |
2.2/1.1 |
2.2/1.1 |
2.0/0.9 |
|
2.8/1.1 |
2.8/1.1 |
2.25/0.9 |
|
|
5.6/1.1 |
5.6/1.1 |
5.05/0.9 |
|
|
2.8/2.2 |
2.8/2.2 |
2.25/2.0 |
|
|
5.6/2.2 |
5.6/2.2 |
5.05/2.0 |
|
|
5.6/2.8 |
5.6/2.8 |
5.05/2.25 |
Chemical Composition
|
No. |
C |
Si |
Mn |
S |
P |
Cu |
Ni |
Cr |
Mo |
|
D |
0.12 |
0.03 |
0.6 |
0.05 |
0.02 |
0.2 |
0.15 |
0.1 |
0.05 |
|
L |
0.13 |
0.03 |
0.6 |
0.05 |
0.15 |
0.03 |
0.04 |
0.06 |
0.05 |
|
MR |
0.13 |
0.03 |
0.6 |
0.05 |
0.2 |
0.2 |
0.2 |
0.1 |
0.05 |
Mechanical Properties & Applications
|
Standard Name |
Nominal Hardness HR30TS |
Strong Yield MPA |
Scope of Application |
|
T-1 |
49 |
230 /-50 |
Drawing requirements, drawn ironing cans, nozzles, nozzles, closures |
|
T-2 |
53 |
245 /-50 |
Ring and plug, dome, closure, shallow pull and special tank parts |
|
T-2.5 |
55 |
260 /-50 |
Battery cell, small can cover and body |
|
T-3 |
57 |
275 /-50 |
Cans and cans, large diameter caps, crown caps |
|
T-3.5 |
59 |
290 /-50 |
Can body, closure and crown lid |
|
T-4 |
61 |
340 /-50 |
Can body, closure and crown lid |
|
T-5 |
65 |
480 /-50 |
Cans and cans |
Ordering Notes
The ordering elements for tin plating generally include: standard grade (including steel grade code, annealing method and other information such as MR T-3 CA), size (the default order is thickness * width * length, tin plating amount ((different thickness plating) Tin needs to add A/D as the marking line mark, if not, no marking line will be marked), surface, order quantity, etc.
When ordering tin plating, please confirm with our sales staff the end use, such as canbody, ends, twist off caps, crown cork, EOE, etc., as well as the contents, special contents such as milk powder, high protein food, mushrooms, fruits, etc.;
Quality inspection process
FAQ:
Q1:Can you send samples?
A:Of course, we can provide customers with free samples.
Q2:What product information do I need to provide?
A:Please kindly provide the grade, width, thickness, surface treatment requirement should you have and quantities you need to purchase.
Q3:It's my first time to import steel products, can you help me with it?
A:Sure,we have agent to arrange the shipment, we will do it together with you.
Q4:What ports of shipment are there?
A:Under normal circumstances, we ship from Shanghai, Tianjin, Qingdao, Ningbo ports, you can specify other ports according to your needs.
Q5：Can you accept customize?
A: Yes. It can be customized as per the customers' request.
Q6:What are the certifications for your products?
A:We have ISO 9001, MTC, ISO14001，third parties’ inspections are all available such SGS, BV ect.
Q7:How long does your delivery time take?
A:In general, our delivery time is within 7-15 days, and may be longer if the quantity is extremely large or special circumstances occur.
Q8: How many countries you already exported to?
A:We have exported to Canada, Russia, Belarus, Poland, Brazil, Mexico, Colombia, Ecuador, Peru, Iran, Vietnam, Malaysia, UAE, Nigeria and other countries. Our export experience is rich, we are familiar with different market needs, can help customers avoid a lot of trouble.
Q9:Can I go to your factory to visit?
A:Of course, we welcome customers from all over the world to visit our factory.
Q10:Does the product have quality inspection before loading?
A:Of course, all our products are strictly tested for quality before packaging, and unqualified products will be destroyed and customers can appoint third parties to inspect the products before loading too.
Q11:How to pack the products?
A: Standard export sea-worthy packaging, the inner layer has a waterproof paper outer layer with iron packaging and is fixed with a fumigation wooden pallet.It can effectively protect products from corrosion and various climate changes during ocean transportation.
Tags :
Questions? Start The Conversation
WHATSAPP : +8615653198219
EMAIL :
tina@yhcoatedsteel.com
TEL : +8615653198219
Yehui Road, Dianzi Industrial Park, Boxing County, Shandong Province
